Preparing students for mechatronics engineering careers with digital manufacturing technology
Tecnomatix software helps students create digital twins of integrated manufacturing systems
Kennesaw State University
A leader in innovative teaching and learning, Kennesaw State University offers more than 150 undergraduate, graduate and doctoral degrees to its more than 35,000 students. With 13 colleges on two metro Atlanta campuses, Kennesaw State is a member of the University System of Georgia and the third-largest university in the state.
https://www.kennesaw.edu/- Штаб-квартира:
- Kennesaw, Georgia, United States
- Решения:
- Process Simulate, Tecnomatix
Managing the learning curves with undergraduate students is very challenging because of the high rotation rate and their mobility. Implementing high-quality case studies is important. We can potentially gain attention from industry through academic projects.
Kennesaw State University
Preparing future mechatronic engineers
The Southern Polytechnic College of Engineering and Engineering Technology at Kennesaw State University (KSU) provides high-quality engineering degrees with education led by industry-expert faculty in the university’s state-of-the-art facilities. As the second-largest engineering college in Georgia, the institution serves more than 4,500 students, offering 20 undergraduate and graduate engineering degrees and engineering technology degrees.
The college offers a bachelor’s degree in Mechatronics Engineering that combines practical skills from mechanical engineering, electrical engineering and computer science. Graduates will be well-skilled in the hands-on application of robotic technology, and can select from a wide spectrum of industries for career choices. The mechatronics degree program seeks to produce graduates who can pursue registration as professional engineers, careers in mechatronics engineering or graduate education. The mechatronics degree program has close to 500 students.
One of the elective courses in the mechatronics degree program is a senior-level course in Digital Manufacturing, which is also open to students in the Mechanical Engineering and Mechanical Engineering Technology degree programs. The laboratory for the course is located in the Kennesaw State University Technology Center, and includes an integrated manufacturing system with two Kawasaki robots and a Vanderlande conveyor system. The equipment is fully synchronized using Siemens instruments, controls and Totally Integrated Automation (TIA) Portal.
![Preparing future mechatronic engineers](https://images.sw.cdn.siemens.com/siemens-disw-assets/public/5IIsEY6aPO8E1XPnetk98L/ru-RU/kennesaw-state-university_Siemens_PLM_Kennesaw_State_University_cs_70078_640x360_2_tcm27_41419.jpg?w=900&fit=max&q=60&dpr=1&auto=format)
Leading-edge digital manufacturing technology
To equip students of the Digital Manufacturing course with leading-edge technologies, the Mechatronics Engineering department selected the Process Simulate solution in the Tecnomatix® portfolio of digital manufacturing software from Siemens Digital Industries Software. In the spring of 2018, 20 students in the course implemented digital manufacturing technologies using Process Simulate software. Professor David Guerra- Zubiaga, assistant professor of mechatronics engineering at KSU, evaluated other digital manufacturing systems, but made the decision for Tecnomatix after attending a Siemens Digital Industries Software training course on Process Simulate in robotics simulation.
“Strategically, KSU is using Tecnomatix in the Mechatronics Engineering curricula to introduce Siemens digital manufacturing concepts,” says Dr. Guerra-Zubiaga. “We expect that other engineering programs could use this platform. A challenge is showing the potential of the software not only in the Mechatronics Engineering program, but also in other academic programs. It takes time to create good case studies that demonstrate this potential, but we are on the right track.”
Students build digital twins of integrated manufacturing systems
Students in the Digital Manufacturing class use Process Simulate to perform virtual simulations with virtual prototypes – digital twins – that replicate the real integrated manufacturing system. The students are organized into teams that work in a project-oriented learning environment to implement simulations of three integrated manufacturing systems, following course case studies. The handson approach enables students to understand and apply advanced manufacturing concepts including the Internet of Things, digital twins, collaborative robotics and Industry 4.0.
“Managing the learning curves with undergraduate students is very challenging because of the high rotation rate and their mobility,” says Dr. Guerra-Zubiaga. “Implementing high-quality case studies is important. We can potentially gain attention from industry through academic projects.”
![Students build digital twins of integrated manufacturing systems](https://images.sw.cdn.siemens.com/siemens-disw-assets/public/53lhfDUr4ALfAHC56HQhar/ru-RU/kennesaw-state-university_Siemens_PLM_Kennesaw_State_University_cs_70078_640x360_4_tcm27_41420.jpg?w=900&fit=max&q=60&dpr=1&auto=format)
Support from Siemens
A key aspect of the successful implementation of Tecnomatix at KSU was support from Siemens. “We used Siemens Global Technical Access Center support services as we moved through the implementation,” Dr. Guerra-Zubiaga explains. “Siemens also provided a grant to KSU supporting mechatronics and advanced manufacturing education.”
Siemens is a member of the Industry Advisory Board, providing support, guidance and advice on the mission and goals of the Mechatronics Engineering department and promoting collaboration between academia and industry. Siemens USA also funds an annual scholarship for undergraduate students seeking the bachelor’s degree in Mechatronics Engineering.
Benefits for faculty, students and the university
The use of Siemens Digital Industries Software solutions at KSU has yielded benefits for faculty, students and the university.
Professors used Tecnomatix software to help prepare research papers that were presented at the American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition (IMECE) in 2017. In addition to the role of Process Simulate as a foundation for the Digital Manufacturing class, students of the class used the software in preparing five papers that have been accepted for ASME IMECE 2018, and are collaborating with professors at universities in China, Mexico, Turkey and Switzerland to create the final versions of the papers.
In summer 2018, KSU welcomed a student from Fribourg University in Switzerland who was preparing a bachelor thesis implementing the Siemens software. The student worked with KSU students on a project exploring methods and procedures for implementing product lifecycle management (PLM) tools, under the supervision of Dr. Guerra-Zubiaga and Dr. Donato Laurent at Fribourg University.
“We will continue to conduct and publish research using Siemens Digital Industries Software solutions,” says Dr. Guerra-Zubiaga. “It has been very beneficial to get to know the digital manufacturing experts at Siemens, as well as other universities using the technology. We have also gained a deeper understanding of the skills students will need in industry. A next step is continuing exploring the digital twin and Industry 4.0 aspects connecting Siemens Tecnomatix software and TIA Portal for implementing virtual commissioning in an integrated manufacturing system.”
KSU is using Tecnomatix in the Mechatronics Engineering curricula to introduce Siemens digital manufacturing concepts. We expect that other engineering programs could use this platform.
Kennesaw State University